It can also make it more portable. Another benefit of losing the receiver is saving the money it would have cost. The primary drawback with this simpler setup is that you lose out on sound quality and volume. And it gets even simpler and easier if you have a turntable that comes equipped with built-in speakers anyway, though the sound quality of those speakers will be even lower than the audio from a pair of active speakers.
But if you want the best possible sound quality, foregoing the receiver is not the way to do it. You simply can not go without a receiver or amplifier and expect to sound quality to still be top notch.
I have a music cast Yamaha receiver and I bought a pre amp and I still cant get my turntable to play. Only white noise. I hooked a different turn table up and still the same problem. The receiver has a phono input but no groundwire screw. There might be something wrong with the receiver. I believe yes depending on how old or age of your CD player. I got one first early ones in — needs receiver.
I have one now that is portable CD player but just as good and you can hook up speakers or headphones and it works. Powered speakers give you more sound without the receiver. Once upon a time, this was all connected and worked. I cannot find anything online on how to connect speakers with no RCA reciprocal connections. Help please!
While Bose speakers are nice I think they are over rated for the price especially when they come with an Aux port but no RCA connection. But its either that or buy new speakers with RCA input or buy and use a receiver that has RCA input for your record player and has aux output for your speakers.
I know typically the older receivers do not have aux output ports. I have a Yamaha CD player and a Bang and Olufsen turntable connected to my Nakamichi receiver which are connected to speakers these are old but quality units.
Is there a cable that has two speaker wires to connect to the receiver output to speaker that convert to a 3. Your email address will not be published.
Notify me of follow-up comments by email. Notify me of new posts by email. Some recommended products may use affiliate links. As an Amazon Associate I earn from qualifying purchases. But do you need it? The truth is, using a receiver generally results in better sound quality It also allows you to easily switch between audio inputs, which is a huge bonus if you have multiple audio sources, like a TV, CD player, etc.
For those reasons, most people will want to connect their turntable to a receiver. What A Standard Setup Looks Like In order to connect various video and audio components to a speaker you generally need a receiver.
Ditching The Receiver Minimalism is probably the biggest reason for losing this component. In most systems, you can find the preamp in a few different places: Built into your record player Built into a receiver Located in its own separate box which sits between the receiver and turntable in the signal chain. When you need a barebones stereo receiver dedicated to your turntable, the Sherwood RX is the one for you.
Having no bells and whistles allow it to focus on crisp, high-quality sound delivery. Instead, it feeds an audio signal that needs to be supplied to another source, such as an amplifier or speaker. This is where a stereo receiver comes in. The receiver acts as the hub of your entire audiovisual system. This is where you connect all your audio devices, such as turntables, CD players, and TVs.
The audio signal from these devices is then sent to the connected speakers and subwoofers. One of the most significant advantages of a receiver is the ease of switching from one device to the next. You can switch to listening to your output of choice with the touch of a button. They also have built-in tuners to allow you to adjust the sound quality, tweak the EQ settings, and other audio fine-tuning.
Receivers also typically have built-in amplifiers to boost the sound quality, although these are not as powerful as a true external amplifier. For home turntable enthusiasts, however, a receiver and speaker combo are more than enough. Since receivers are capable of supporting so many audio devices, they vary widely in features and usage, and with more features, the cost goes up.
At the minimum, you need to focus on two things: RCA inputs and speaker outputs. Most turntables are still analog and make use of RCA connectors. These are the pairs of red and white connectors you often see with old school electronics. You also need to check if your receiver is capable of supporting a turntable because most analog turntables have a weak audio signal output.
This makes them incompatible with modern electronics unless the signal is boosted. This is the job of a phono preamp. Most higher-end receivers have phono preamps built-in. Some turntables also have a preamp. In both cases, you can hook the turntable directly into your receiver. They often feature better sound quality and a host of other options. When in doubt, test it out! Most turntables have a switch to bypass its built-in preamp.
Of course, a receiver is useless on its own, unless you want to listen using your dj headphones all the time. So, pay close attention to the speaker outputs of your receiver. The most common output connectors are the speaker terminals. Cheaper receivers feature a spring clip connector with a binding post. Some offer support for banana plugs, which offer a more secure connection. Some receivers also support line-level RCA outputs, often used to create speaker zones in your house.
You can also use this to set up a true surround sound experience in your home theater. These allow you to stream music directly to your receivers with services like Spotify or Pandora. Some even have Bluetooth support so you can stream music from your mobile phone. With the prevalence of digital devices, receivers have adapted by featuring optical and coaxial cables as standards.
They also now support USB connection that allows you to connect a computer, USB hard drive, or flash drive to your receiver and play songs from there. You need to figure out the power wattage on your stereo receiver for your turntable before you pair it to other audio devices. Incompatible power ratings could lead to speakers blowing or barely amplified audio signals.
If you find a receiver with an integrated amp, it could help bridge the power gap between two devices. How much power you need will depend on the venue, the music you play and personal preference.
You can find a wide range from 20 watts to watts per channel. In general, our team suggests looking for a unit that can deliver around watts per channel for at-home use. Of course, if you are a professional DJ used to large venues, then you may need more power per channel.
Analog inputs on the best receiver for a turntable are the good old-fashioned red and white cables. These devices include CD players, decks, and of course, turntables. Does either one of your units have an integrated amplifier or phono preamp? If so, great! The connection will be easier. The more inputs you have the better because it means you can hook up more devices to one unit.
There are devices in which you can find up to five analog audio inputs. The best stereo receiver will have a type of wireless connection whether it is Bluetooth connectivity or Wi-Fi. This allows for easy access to streaming services to play music you may have uploaded or saved. Our experts will quickly touch on digital inputs because although they are less likely needed for turntable connection, they will be present in the best receivers.
You will most likely find optical and coaxial connections plus USB. You will be able to easily connect the receiver for media use such as integration into your home theater system. The type of analog inputs you need will depend heavily on the rest of your setup.
The first consideration for all audio or visual setups is compatibility for all devices. Our experts say that the easiest way to connect your turntable to other devices is via phono inputs. Check to see if your turntable has a phono connection. If so, then our audio team suggests looking for a receiver that does as well. The speaker terminals are the most important stereo speaker support for connection. Examples of receiver outputs include banana plugs, spring clips, line-level RCA outputs, and a stereo RCA output, among others.
Which outputs do you need? It depends on what you are connecting. If you are considering your bookshelf or floorstanding speakers, then look at the speaker outputs on those devices. RCA speaker outputs are very common in speakers and receivers, so they are a good bet for compatibility. Do you even need a receiver for your turntable? Is the extra FM tuner necessary, or will an amplifier do the trick?
A turntable such as a top-performing automatic turntable needs a receiver or speaker to play sound. The turntable will feed the audio signals into a separate device, which will then generate the audio.
It can be said that the receiver is the centerpiece to your whole setup. All your devices, such as your CD player, TV, and cassette decks will pass through the receiver and then the signal is allocated to the correct speakers and sub.
The receiver for your turntable also acts as a very easy control hub. You can switch listening from one device to another with the simple press of a button.
You can also perfect the sound quality with the EQ adjustment knobs on the best receiver for turntable setups. For those who require a larger sound output for bigger venues, an amplifier can greatly help your audio quality.
How easy it is to connect a turntable to a receiver depends on the connections. As our professional tech team said, if phonograph inputs are present, the integration is very simple. You should always put all your devices on a stable and flat surface. Doing so will minimize vibrations and keep the units level.
0コメント